MOBILAIR construction compressors Type: M13E with electric drive Made in Germany The combination of a powerful KAESER screw compressor block with an energy-efficient SIGMA PROFILE and an environmentally friendly electric motor achieves high performance with zero emissions. The modern double-walled soundproof hood is made of rotation-sintered polyethylene. It is corrosion-free,...
The combination of a powerful KAESER screw compressor block with an energy-efficient SIGMA PROFILE and an environmentally friendly electric motor achieves high performance with zero emissions.
The modern double-walled soundproof hood is made of rotation-sintered polyethylene. It is corrosion-free, scratch-resistant, retains its value and is available in various special colors. The large hood opening angle makes it easier to access the clearly arranged technology and offers the best ease of maintenance.
Technical data (the performance parameters listed refer to a maximum of 1000 m above sea level)
Volume flow 1.2 m³/min.
Max. overpressure: 7 bar
Make/type drive motor: DIM
Rated power drive motor: 7.5 kW
Speed of drive motor full load: 3000 1/min
Power supply: 400V-3ph-50Hz
Required fuse: 25A
Compressed air connection: 1x G½
Sound power level LWA, according to Directive 2000/14/EC: <=97 dB(A)
Sound pressure level from ISO 3744 (r=4m): 73 dB(A)
Operating weight of basic system: 187 kg
Technical changes reserved.
Type: MOBILAIR with electric drive
steering
Malfunctions, such as overcurrent release, incorrect motor rotation direction or over or under voltage, lead to the system being switched off immediately and are visually indicated by the KAESER CONTROL. A pole reversing switch can be used to switch the rotating field quickly and easily. By throttling the inlet valve, the consumption-optimized, continuous adjustment of the delivery quantity takes place
transport
The compact design with a low center of gravity, large pneumatic tires and a long, foldable push handle make handling child's play. A recessed lifting eye is also on board. The compressor can be easily lifted by hand using four ergonomic handles, even without a crane. The version with machine feet is available for stationary use.