KAESER piston compressor
Type: i.Comp 8-G - Oil-free compressed air - unit
The i.Comp 8-G is an oil-free piston compressor with a speed-controlled drive motor and the internal control i.Comp CONTROL. The system is equipped with a rotation-sintered polyethylene hood, which is soundproof, impact-resistant and stable in value. Ideal for craft businesses, industry, workshops and laboratories. Made in Germany.
Technical data (volume flow and performance data according to ISO 1217:2009, Annex E)
- Flow rate at 6 bar, 2100 rpm: 404 l/min
- Flow rate at 11 bar, 1800 rpm: 291 l/min
- Max overpressure: 11 bar
- Total power consumption at 6 bar, 2100 rpm: 3.45 kW
- Total power consumption at 11 bar, 1800 rpm: 3.5 kW
- Speed range min./max.: 1000-2100 rpm
- Duty cycle: 100%
- Rated power drive motor: 3.1 kW
- Electrical supply: 380-480 V / 50-60 Hz
- Sound pressure level: 65 dB(A)
- Sound power level: 81 dB(A)
- Dimensions (W x D x H): 790 x 1150 x 1030 mm
- Ambient temperature min./max.: +3/+45 °C
Technical changes reserved.
Key product benefits of the KAESER i.Comp piston compressor unit
Oil-free compressed air
The i.Comp delivers oil-free compressed air. That means there is no oil-laden condensate that needs to be disposed of. That protects the environment. Oil changes and oil checks are also no longer necessary, which results in low overall service costs. At the same time, the service life of the compressor increases.
Speed-controlled drive motor
In almost all cases, there is a fluctuating consumption profile for the compressed air. The frequency converter of the i.Comp enables the volume flow to be precisely adjusted to the current requirement, which minimizes pressure fluctuations. In comparison to a non-frequency-controlled compressor, switching cycles are largely avoided.
Control i.Comp CONTROL
The i.Comp is equipped with a powerful, easy-to-use control. For example, the working pressure of the compressor can be adjusted. The controller displays all important operating parameters of the compressor, allowing easy monitoring of the compressor. Necessary maintenance and possible faults are also displayed. The i.Comp can optionally be equipped with the Sigma Control 2 control, so that two i.Comps can be controlled or two or more i.Comps can be connected to a higher-level control.
Multifunctional sound insulation hood
The hood of the i.Comp consists of rotationally sintered polyethylene. The hood, which opens upwards, is robust, impact-resistant and retains its value. It enables very good accessibility of all components for service purposes and significantly reduces the space required by the compressor.
100% duty cycle thanks to efficient cooling
The powerful fan and the optimized cooling air flow reduce the operating temperature of the compressor. As a result, it can run continuously even at 11 bar and cannot overheat even at 100% duty cycle.
